Over the years we have been involved in many steelwork installations, some as part of a larger project, some done for other builders and individuals, many shy away from doing the steel beams as not only is it dangerous if you get it wrong but can also compromise the building.
With over 30 years experience of installing steel beams of all sizes, to every conceivable kind of application the pictures below are just a couple of more recent projects and installations.
We have our own magnetic drilling equipment, enabling us to drill holes in steelwork from 10mm to 50mm.
Bolted RSJ’s, to support old masonary wall and open up main load bearing wall.
Another steel setup designed for an unusual application
This is a common application, we have done dozens of these chimney breast supports.
A standard RSJ on concrete block pad stones to increase opening.
As above but double steels because of extra bearing weight from cavity wall, this was to replace a previously done opening that had been condemned as unsafe.
RSJ holding up existing roof structure and new extension roof
We also specialise in structural alterations.
On a larger scale, side of barn on new steel beams and timber posts
Roof support structure
As well as RSJ beam installation we also supply and install steel reinforcment
Essex; Chelmsford, Brentwood, Wickford, Iford, Southend, Colchester etc
Kent; Welling, Dartford, Gravesend, Bexley, Eltham etc
If you are looking for any type of steelwork, contact us on the contact page